NEWS

Foam densifiers can help people keep recyclable foam materials out of landfills

 

Recycling is the best way to keep trash out of landfills and help minimize our environmental footprint. Recycling must be placed in city-acceptable bins and sorted properly. 

Expanded Polystyrene (EPS) which is commonly known as Styrofoam is a primary contributor to landfill waste. It's estimated that Styrofoam makes up to 30% of landfill space by volume. It is non-biodegradable and lasts forever in a landfill. To remove Styrofoam out of the landfill is very important for most of the people.

 

 

Properly disposing of Styrofoam is an issue eventually each of us must face. The use of Styrofoam in packaging has created an alarming amount of waste in our landfills over the past few decades. Styrofoam is comprised of 98% air, and is non-biodegradable—which means that it will not break down on its own for a tremendous length of time.

For those who want to know more about Styrofoam recycling, here is a good solution. Due to the bulkiness of Styrofoam, it is difficult to manage it for most of us. It would occupy large storage space if you don’t have a big enough warehouse, and it will cost you much money to transport it to the recycling center.

 

 

So professional machine which can help reduce the foam volume should be known by people. Such machines like densifiers which can be supplied by an American company called GREENMAX. The densifier can finally hep reduce the costs and storage space of your warehouse.

Foam densifiers from GREENMAX can transfer the material to a shredder where the foam exposed to heat and pressure to be melted into ingots. This densified foam is extruded through a small outlet of the machine, and when cooled, it will become high-density solid. This melting process is the most efficient which can melt the Styrofoam at a ratio of 90:1. its original volume and producing no emissions.

 

 

Styrofoam has been high on the list of environmental concerns for a long time, so if you want to raise the Styrofoam recycling rate, such recycling machines deserve to be applied.